The BEAR CLAW DRYWALL REPAIR CLIPS are designed to replace a damaged section of drywall with a new section of drywall. The clip is superior to the thin metal repair sheets because it replaces the damaged section with a full 12.5mm piece of drywall instead of a flimsy metal patch. This helps to maintain the sound and fire integrity of the original wall. The BEAR CLAW DRYWALL REPAIR CLIPS work by using a series of "Claws" compressing into the existing wall. The clips tabs are used to make the face of the patch board perfectly flush with the face of the wall. Many of the repair products presently on the market use the back of the drywall to align the patch. Unfortunately, not all drywall is the exact same thickness and sometime the patches are either depressed or project past the wall. With the BEAR CLAW DRYWALL REPAIR CLIP a 12.5mm (1/2") piece of drywall can be used to patch 12.5mm (1/2"), 15mm (5/8") or 25mm (1") board equally well. How's that for versatility!
How the clip works
Repair Instructions
Typical
Hole in
Wall  
Trace
Patch Outline on Wall
Cut Around
Outline Remove Damaged Section
Put the
Clips on Patch
Place Patch into Wall
Apply
Joint Compound & Tape
Sand Smooth, Primer and Paint
The BEAR CLAW DRYWALL REPAIR CLIP is simply the
easiest and fastest method of repairing holes in drywall. After
learning the simple process for repairing damaged drywall with the BEAR CLAW
DRYWALL REPAIR CLIPS, anyone can fix a hole in two to three minutes.
The BEAR CLAW DRYWALL REPAIR CLIPS gives
professional looking results. The clip is made of 0.38mm (0.015")
thick metal (about the thickness of a corner bead), so it is easy to cover
with joint compound.
The BEAR CLAW REPAIR CLIPS are less expensive
than other drywall products. Repairs typically cost between £0.60 -
£1.20 depending on the size of the hole and the quantity of clips purchased
(50 Pack). When weighed against the labour rate for most professionals, it
is much more cost effective to use the clips than repair walls using
traditional methods.
The BEAR CLAW DRYWALL REPAIR CLIPS can utilize a
piece of 12.5mm (1/2") drywall to repair a wall of any thickness. You
can use 12.5mm clips to fix a hole in 15mm or 25mm board equally as well. The clips make the patch board used
flush with the face of the wall instead of the back like most products in
the market.
The BEAR CLAW DRYWALL REPAIR CLIPS can fix a hole
or any size or shape. The clips can be used across studs or can
fix a round or odd shaped hole.
The clips are ideal for opening up walls for
routine electrical/plumbing tasks. Then simply use the removed section
of wall to repair the opening when your work is complete. This product is
Ideal for the professional (plumber, electrician, telephone service or
computer cabler) who is opening up walls on a regular basis to repair
something or pull a wire/cable.