This tool is unique as it combines a powerful impact driver and collated autofeed driver in one. It also offers very distinct advantages over other impact drivers and collated autofeed tools.
A large part of the cost of any power tool is the batteries and the Durofix driver is supplied with 2 x High Capacity / Rapid Charge (40 min) Li-ion battery packs which are far superior to the older technology Ni-Cd or NiMH batteries found on many other tools. It also means you do not have to go to the expense of additional or replacement batteries as the two batteries alone are usually more than enough enough for even the most demanding of users. The long life aspect of this technology also means that the batteries are likely to last the life of the tool itself!
As an impact driver alone the 176Nm (1,560 in-lbs) of power of this tool sets it apart from the rest which are mostly 125Nm to 140Nm.
The collated autofeed takes between 25-75 mm collated screws. The attachment is easy to operate using an Allen key to take on and off and set the gauge to length of screws being used, and a simple dial controls countersink management. The attachment can be set to feed from the top or sides and Durofix do not require that the use of their own brand collated screws unlike other companies. Durofix do however recommend that a quality strip is used so that the tool operates at optimum speed with chance of jamming etc.
Specification
18 Volt
167 Nm power (approx 20-25% more than equivalent 14.4V Impact Drivers)
2300 RPM / 3000 IPM
Powerful motor with external changeable carbon brush
Durable aluminum gearbox housing
Forward / Reverse
Electric Brake
Variable Speed Control
LED Battery capacity display
2 x High Capacity / Rapid Charge Li-ion battery packs
40min Intelligent Fast Charger
Attachment suitable for screws 21,25, 32,35,38,42,45,50,55,65&75mm
Countersink control dial
Quick and easy to fit and remove attachment
Rubber end piece for paper protection x 2
Belt track for stability
Release button for easy removal of strips
Autofeed positions screw before driving so less chance of jamming
Attachment can be fitted to feed from top or side
2 x Extended Phillips bits
Carry Case
1 Year warranty
Tool Weight 2.59 Kg
